Catalog / Actuator Test & Benchmark Equipment / Dynamometer Loads & Brakes
Dynamometer Loads & Brakes12 of 12
What the actuator under test pushes against: magnetic powder brakes, hysteresis brakes, and the brake resistors a second actuator needs when it acts as the load.
Have numbers? Enter them and see every dynamometer loads & brake ranked against them
| Part | Made in | Rated torque | Load type | Max speed | Heat dissipation | Control | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|
| Magtrol HB-750M-2 Hysteresis Brake (5 N·m)Magtrol · HB-750M-2 | US | 5 N·m | Hysteresis brake | 7,000 rpm | 200 W | 24 VDC standard coil, 383 mA… | Quote | |||
| Magtrol HB-1750M-2 Hysteresis Brake (13 N·m)Magtrol · HB-1750M-2 | US | 13 N·m | Hysteresis brake | 6,000 rpm | 350 W | 24 VDC standard coil, 600 mA… | Quote | |||
| ATO ATO-PB-015 Single-Shaft Magnetic Particle Brake (15 N·m)ATO · ATO-PB-015 | CN | 15 N·m | Magnetic powder brake | 1,800 rpm | 250 W | 24 VDC, 0.94 A rated current | $388.23 | |||
| ATO ATO-PB-050 Single-Shaft Magnetic Particle Brake (50 N·m)ATO · ATO-PB-050 | CN | 50 N·m | Magnetic powder brake | 1,800 rpm | 700 W | 24 VDC, 2.15 A rated current | $556.77 | |||
| ATO ATO-PB-100 Single-Shaft Magnetic Particle Brake (100 N·m)ATO · ATO-PB-100 | CN | 100 N·m | Magnetic powder brake | 1,800 rpm | 1,100 W | 24 VDC, 2.4 A rated current | $1,038.46 | |||
| Mitsubishi ZKB-2.5XN Powder Brake (25 N·m)Mitsubishi Electric · ZKB-2.5XN | JP | 25 N·m | Magnetic powder brake | — | — | 1.24 A rated current, 30 W | Quote | |||
| Mitsubishi ZKB-5XN Powder Brake (50 N·m)Mitsubishi Electric · ZKB-5XN | JP | 50 N·m | Magnetic powder brake | — | — | 2.15 A rated current, 51.5 W | Quote | |||
| Lanmec FZ25.K/F Magnetic Powder Brake (25 N·m)Lanmec · FZ25.K/F | CN | 25 N·m | Magnetic powder brake | 1,800 rpm | 450 W | 24 VDC, 0.73 A | Quote | |||
| G-Plas FZ50-S Single-Shaft Magnetic Powder Brake (50 N·m)G-Plas · FZ50-S | CN | 50 N·m | Magnetic powder brake | — | — | 24 VDC | $163 | |||
| Daysensor / DST AHB-5 Air-Cooled Hysteresis Brake (5 N·m)Daysensor · AHB-5 | CN | 5 N·m | Hysteresis brake | 15,000 rpm | 200 W | Coil 32 Ω at 25 °C | Quote | |||
| ODrive ACC-0006 Brake Resistor Set (8 × 2 Ω, 50 W)ODrive Robotics · ACC-0006 | US | n/a | Brake resistor | n/a | 50 W | 2 Ω each | $19 | |||
| ATO-TC-001 Manual Current Controller for Powder/Hysteresis Brakes (0-4 A)ATO · ATO-TC-001 | CN | n/a | Brake controller | n/a | — | Output 24 VDC / 0-4.0 A, 0.01 A… | $101.98 |
No dynamometer loads & brakes match these filters. or switch “Made in” to Anywhere.