Allied Motion Megaflux MF0060020 Frameless Torque Motor (48 VDC)
Allied Motion · MPN MF0060020 (winding A, 48 VDC; full code MF0060020-A00-xx) · Maglev ID mo-allied-megaflux-mf0060020-a
US Maker in United States, factory not confirmed unknown VERIFIED
Thin-ring 60.35 mm frameless torque motor with 36.195 mm bore and standard Halls; high peak-to-continuous torque for direct-drive joints and gimbals.
Specifications
| Peak torque | 5.3 Nm (+/-25%) |
|---|---|
| Continuous torque | 0.54 Nm stall (48 V winding, plate-mounted) |
| Outer diameter | 60.35 mm stator OD |
| Axial length | 19.7 mm stator; rotor 24.6 mm |
| Voltage | 48 VDC winding (also 150/300 VDC) |
| Mass | 0.27 kg |
| Rotor ID | 36.195 mm |
| No-load speed | 3382 rpm |
| Torque constant | 0.13 Nm/A |
| Peak current | 41 A |
| Terminal resistance | 1.17 ohm (+/-12%) |
Who makes it
MakerAllied Motion Technologies
Based inUnited States
RoleBrand owner
Need a different shaft, connector, firmware or enclosure, or a price at 1,000 units? Maglev takes the catalog part to the factory and comes back with a custom version and one fixed price.
Landed cost in the US
CN
41.5%
TW
10%
VN
16.5%
IN
14%
JP
12.5%
KR
12.5%
DE
10%
MX
14%
US
0%
Total US duty on this part by where it is made (2026-10-29). Mexico shown before USMCA preference; qualifying goods enter duty free. Your factory choice, not the shipping port, sets the origin.
Loading duty data…
Compliance
| HTS classification | 8501.31.40.00 typical, not a ruling |
|---|---|
| NDAA | unknown |
| Blue UAS | unknown |
| FCC | n/a |
Sources
- https://www.alliedmotion.com/wp-content/uploads/datasheets/Megaflux_Frameless_Torque_Motors_MF0060_R7d.pdfMF0060 datasheet R7d (issued 6 May 2016): spec table, dimensions, model numbering (Halls standard MF0060-MF0127)
Record confidence: VERIFIED. VERIFIED means the maker's own documents; REPORTED means a credible third party; UNVERIFIED means a single weak source. Anything we could not confirm says unknown.